72
EN
SUBSIDIARY SETTINGS
DISPLAY SET
8
SUPERIMPOSE
^
OFF /
AUTO
When this function is set to
A
AUTO
B
, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (
A
pg. 20)
OFF
:
To turn off superimposed indications.
AUTO
:
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
NOTES:
●
Even when
A
SUPERIMPOSE
B
is set to
A
OFF
B
, you can display
the various operational indicators by pressing
ON SCREEN
. To
clear the operational indicators, press
ON SCREEN
again.
●
When you use this unit as the source player for editing, be sure to
set
A
SUPERIMPOSE
B
to
A
OFF
B
before starting. (
A
pg. 63)
●
When you select
A
AUTO
B
, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8
BLUE BACK
^
OFF /
ON
When this function is set to
A
ON
B
, the TV screen becomes all blue
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals,
set this function to
A
OFF
B
.
8
DIMMER
^
BRIGHT
/ DIMMED
You can change the brightness of the front display panel.
BRIGHT
:
Normally select this.
DIMMED
:
To dim the front display panel. (Blue lamp on the front display
panel is turned off.)
8
POWER SAVE
^
OFF
/ ON
When this function is set to
A
ON
B
, you can reduce the power
consumption while the unit is turned off.
NOTES:
●
During Power Save mode
^
^
the front display panel will be turned off.
^
the Just Clock function (
A
pg. 77) does not work.
●
Power Save does not work when
^
^
the unit is in the Timer mode.
^
the unit’s power is turned off after timer recording or Instant
Timer Recording.
^
the Automatic Satellite Programme Recording mode is
engaged. (
A
pg. 49)
^
A
L-2 SELECT
B
is set to
A
DECODER
B
,
A
SAT VIDEO
B
or
A
SAT
S-VIDEO
B
. (
A
pg. 65)
●
It takes some time for the unit to complete initialisation after you
turn on the unit power, with
A
WAKE UP
B
blinking on the front
display panel.
8
ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in
10 different languages. Although Auto Set Up selects the language
automatically (
A
pg. 19), you can change the language setting
manually as required.
For details, refer to
A
On-screen Language Set
B
(
A
pg. 20).
If you connect the unit and TV with Component Video Connection
(
A
pg. 16), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction
of higher-quality images.
8
Interlaced scan
In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of
the second half of the picture in-between lines of the first half of the
picture.
8
Progressive scan
Progressive scan displays all the horizontal lines of a picture at
one time, as a single frame. This system can convert the interlaced
video from DVD into progressive format for connection to a
progressive display. It dramatically increases the vertical
resolution.
1
Press
PROGRESSIVE SCAN
for 3 or more seconds.
●
Video output indicator (
q
) lights on the front display panel if
Progressive scan mode has been established. (
A
pg. 12)
●
Each press of
PROGRESSIVE SCAN
for 3 or more seconds
switches the scan mode.
NOTES:
●
When the progressive mode is set, be sure to set
A
L-1 OUTPUT
B
to
A
COMPONENT
B
(
A
pg. 64). Progressive scan is output only
from [COMPONENT VIDEO OUT] connector.
●
Interlaced scan mode is the setting at your purchase.
●
Interlaced scan mode might be suitable depending on video
material.
●
Scan mode cannot be set while menu screen is displayed.
●
When the Progressive scan mode is engaged, no video signal is
output from [L-1 IN/OUT] connector.
Scan Mode Set
ATTENTION:
Your TV needs to be compatible with PAL Progressive.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
PROGRESSIVE SCAN
CABLE/SAT
DVD
TV
