JVC DR-DX5SE, Instructions Manual

Page: 60 / 92

Filename [DX5SEU_12Editing.fm]
Masterpage:Left+
60
EN
EDITING
Page 60 Wednesday, 23 November 2005 14:13
●
To pause dubbing, press selection keys to select ,
then press ENTER . Both the unit and the external DV
equipment pause dubbing. Pressing
W
on the unit also works
the same way.
10
Press selection keys to select , then press
ENTER . Then press
o
. The DV equipment stops.
11
Press selection keys to select , then press
ENTER .
12
Press
o
twice on the remote control to stop dubbing.
●
Both the unit and the external DV equipment stop dubbing.
NOTES:
●
Dubbing copyright guarded programmes is not possible.
●
Original DV information such as the recording date and time are
not recorded.
●
The superimposed indication during the operation or dubbing is
not recorded.
●
If the dubbing is paused while the channel is set to A DV B , you
cannot switch channels.
To skip unwanted part of the source picture
Press ENTER to stop both equipment, then press selection keys
to select .
Locate the point where you want to restart dubbing by pressing
I
,
N
, or
O
, then press
o
.
Press selection keys to select , then press ENTER to
restart dubbing.
When you dub from DV equipment other than a
camcorder
A Perform step 1 to 4 .
B
Locate the point from where you want to start dubbing,
then stop on the DV equipment.
●
If you pause the DV equipment in this step, a few
second’s still picture will be recorded at the beginning of
the recorded programme.
C Set the input mode to A DV INPUT B on the DV equipment.
●
If you select an input mode other than A DV INPUT B ,
unwanted pictures may be recorded at the beginning of
the recorded programme.
D Perform step 9 to 12 .
DX5SEU_00.book Page 60 Wednesday, November 23, 2005 2:13 PM