20
Pairing the Wireless Subwoofer with the Soundbar
Automatic Pairing
1. Plug the soundbar and the subwoofer into the mains sockets.
2. Press on the unit or on the remote control to switch the unit to On mode. The
subwoofer and soundbar will automatically paired within 30 seconds.
Do not press PAIR on the rear of the subwoofer, except for manual pairing.
It is very abnormal that the connection would fail. You should not attempt manual pairing in normal
usage.
Manual Pairing
If the auto pairing doesn’t work, pair the subwoofer with the soundbar manually.
1. Unplug both units from the mains sockets, then plug them in again after 3 minutes.
2. Press and hold the PAIR button on the rear of the subwoofer. The pair indicator on the
subwoofer will rapidly blink.
3. Press on the unit or on the remote control to switch on the unit. After the subwoofer
is paired with the unit, the Pair indicator will light up.
4. If the Pair indicator still keeps blinking, repeat step 1-4.
• After connecting the power, you must press PAIR on the subwoofer within 20 seconds to be effective.
• The subwoofer should be within 6 m of the soundbar in an open area.
• If the wireless connection fails again, check if there is conflict or strong interference (for example,
interference from an electronic device) around your location. Remove these conflicts or strong
interferences and repeat the above procedures.
TH-D689B_IB_Final190520V1.indd 20
21/05/2019 14:04
