JVC DLA-X500R, Instructions Manual

Page: 44 / 252

Reducing the After-image of Fast-moving Images (Clear Motion Drive (C.M.D.))
Optimal interpolation according to the content is made possible with the new high-definition image interpolation
technique that supports 3D images.
For some scenes, interpolation may cause distortion in the image. In this case, set to “Off”.
.
Intermediate Frame Generation Intermediate Frame Generation
Interpolation Enabled
Original Image
1
Press the [C.M.D.] button
0
Pressing the [C.M.D.] button each time switches the mode in the following
sequence: “Off”
"
“Low”
"
“High”
"
“Inverse Telecine”
"
“Off”...
Setting Description
Off Interpolation is not performed.
Low Softens the image quality.
High Image quality becomes softer than that of the “Low” setting.
Inverse Telecine 60i/60p video images such as those of TVs and DVDs.
Suitable for original images that are 24-frame film sources.
0
Does not function for 24p video images.
* C.M.D. is the abbreviation for Clear Motion Drive.
* The [C.M.D.] button is positioned differently on the remote control depending on the
model in use. (p. 17)
INPUT
Viewing High Contrast Images (Lens Aperture)
JVC has developed an image analysis algorithm, which analyzes the state of the video image in real time, and controls
the aperture dynamically according to the image information.
This technology enables viewers to enjoy video images with enhanced contrast.
1
Press the [LENS AP.] button
Pressing the [LENS AP.] button each time switches the setting in sequence.
Setting Description
Auto 1 Image contrast is enhanced.
Auto 2 Places emphasis on the gradation.
Manual Does not perform dynamic control.
Select this setting to perform adjustment manually.
*1 Manual adjustment is disabled in the “Auto 1” and “Auto 2” setting.
To perform adjustment manually, select “Manual”.
*2 When the setting is changed to Auto after performing manual adjustment, the value
set manually will be used as the aperture value for Auto.
INPUT
44
Adjust/Set