Installing the Projector and Screen
It is recommended that this projector be installed at right
angle to the screen.
When a zoom lens (optional) is in use, you can make use
of the lens shift feature of this projector to shift the
projection screen vertically between 0% to ±50%, and
horizontally between 0% to ±25%.
When a short focal length lens (optional) is in use, you
can shift the projection screen position vertically between
0% to ±15%, and horizontally between 0% to ±5%.
Below are some examples on the layout when a zoom
lens is used.
When shift amount in the upward direction is
+50 %
Install the projector such that the lower end of the
projection screen is at the same height as the center of
the lens.
.
OPERATE I/
B
DVI 3
USB
LAN
RS-232C
STANDBY/ON
LAMP
WARNING
DVI 4
DVI 1
DVI 2
e-shift Sync
RS-232C
1
2
Center Line of Lens
90°
90°
90°
Screen
When shift amount in the upward/downward
direction is 0 %
Install the projector such that the center of the projection
screen is at the same height as the center of the lens.
.
OPERATE I/
B
DVI 3
USB
LAN
RS-232C
STANDBY/ON
LAMP
WARNING
DVI 4
DVI 1
DVI 2
e-shift Sync
RS-232C
1
2
Center Line of Lens
90°
90°
90°
Screen
When shift amount in the downward direction
is -50 %
Install the projector such that the upper end of the
projection screen is at the same height as the center of
the lens.
.
OPERATE I/
B
DVI 3
USB
LAN
RS-232C
STANDBY/ON
LAMP
WARNING
DVI 4
DVI 1
DVI 2
e-shift Sync
RS-232C
1
2
Center Line of Lens
90°
90°
90°
Screen
When shift amount in the right direction is +25 %
Install the projector such that the center of the lens is
aligned with the 1/4 position from the left edge of the
screen.
.
When shift amount in the left/right direction is 0 %
Install the projector such that the center of the lens is
aligned with the center of the screen.
.
When shift amount in the left direction is -25 %
Install the projector such that the center of the lens is
aligned with the 1/4 position from the right edge of the
screen.
.
13
Connection
and
Installation
