JVC DLA-VS2000 Instructions Manual Download

Page: 39 / 47

ENGLISH

Getting Started

reparation

asic Operation

ettings

Troubleshootin

Othe

Cleaning and Replacing the Filter

Remove the inner filter

Clean the filter

Reinstall the inner filter

Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur.

Wash the filter with water and dry it in a shaded area.

In extremely soiled cases, use of a neutral detergent is recommended.
Put on rubber gloves when using a neutral detergent.

After washing the filter with water, make sure that it is completely dry before
reinstalling. Otherwise, electric shocks or malfunctions may occur.

Do not clean the filter with a vacuum cleaner or air duster. The filter is soft
and may be damaged.

Lift up while pushing the claw

Pull the power plug from the power
outlet.

If the filter is damaged or too

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

dirty to be cleaned

Replace with a new filter. A dirty
filter will dirty the internal parts of
the unit and cause shadows on the
video image.

To purchase a new filter or when
there is dirt in the internal parts,
consult your authorized dealer.

Inner Filter
Part No. : LC32058-002A

CAUTION

MEMO

Check that the left and right
claws are locked onto the unit

DLA-RS1X_EN.book Page 41 Thursday, February 21, 2008 6:13 PM

Summary of Contents for DLA-VS2000
















































Search results

Summary of Contents for DLA-VS2000

Reviews:

Related manuals for DLA-VS2000

Brands by name

Popular brands

JVC DLA-VS2000, Instructions Manual

Search results

Summary of Contents for DLA-VS2000

Reviews:

Related manuals for DLA-VS2000

Brands by name

Popular brands