Installation Style
For setting to “Front”, “Ceiling Mount (F)”, “Rear”, or “Ceiling Mount (R)” according to the installation status of the
projector.
0
“Front” or “Ceiling Mount (F)” is set when projector is installed in the front with respect to the screen.
0
“Rear” or “Ceiling Mount (R)” is set when projector is installed in the rear with respect to the screen.
Keystone
For correcting any keystone distortion that occurs when the projector is installed at an angle with respect to the screen.
0
Vertical setting range: -16 to +16
* Increasing the value changes the aspect slightly.
* Image will reduce in size when keystone is adjusted.
-16
0
16
Aspect
The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that
has been input.
“Adjusting the Screen Size (Aspect)” (P. 25)
Display Setup
Back Color
For setting the color of the background to “Blue” or “Black” when there is no signal input.
Menu Position
For setting the display position of the menu.
Signal Display
For setting the display of the input information to “On” or “Off”.
Setting
Description
Off
Not displayed.
On
Shows the input terminal for 5 seconds when input is switched.
68
Adjust/Set
