JVC D-ILA DLA-VS3000G Instructions Manual Download Page 34

Page: 34 / 70

Input Signal

Input Level

For setting the dynamic range (gradation) of the video input.

If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become

underexposed.

Setting

Description

16-235 (Video)

Select this setting if you are inputting video signals (dynamic range: 16 - 235).

0-255 (PC)

Select this setting if you are inputting PC signals (dynamic range: 0 - 255).

Color Space

For setting the color space of the input signal.

Setting

Description

YCbCr444

Select this setting when inputting YCbCr (4:4:4) video signals.

YCbCr422

Select this setting when inputting YCbCr (4:2:2) video signals.

RGB

Select this setting when inputting RGB video signals.

Channel Hide

A function for configuring whether to display video images for each DisplayPort input terminal.

Setting

Description

DP 1

DP 2

Off

Displays video images with the Hide function disabled.

Enables the Hide function and does not display video images.

Adjust/Set

Summary of Contents for D-ILA DLA-VS3000G







































































Search results

Summary of Contents for D-ILA DLA-VS3000G

Reviews:

Related manuals for D-ILA DLA-VS3000G

Brands by name

Popular brands

JVC D-ILA DLA-VS3000G, Instructions Manual

Search results

Summary of Contents for D-ILA DLA-VS3000G

Reviews:

Related manuals for D-ILA DLA-VS3000G

Brands by name

Popular brands