JVC CU-VD40AA, Instructions Manual

Page: 7 / 56

EN
CS
7
Getting Started
CAUTION:
z
Do not use the provided AC adapter and power cord with other devices. In addition, do not use AC adapter, power cord and
USB cable other than those provided with this burner. Doing so may result in electric shock or fire.
NOTE:
*
043-124000-I2 (AC adapter) is also available for customer using CU-VD40AC/AG.
When handling a disc, be sure not to touch the playback/recording side of the disc.
Use only the [
M
] button on the burner or the remote control to eject the disc tray. If you open the tray manually,
there is a risk of the disc dropping out or getting caught.
A battery is included inside the remote control at the time of purchase. Remove the insulation sheet before use.
Accessories
Audio/Video
cable
Power cord AC adapter
(AP-V400U
*
)
USB cable
Remote control
(RM-V41U)
Recording disc (DVD-R DL)
(For use with high definition Everio Camera.
Cannot be used with an Everio Camera.)
DVD-ROM Lithium Battery (CR2025)
Pre-installed in the remote
control unit.
Stand
Placing the Burner
Bottom surface
Stand (provided)
Vent
„
Horizontal orientation
z
Take note of the top and bottom of the burner and
place it in the horizontal orientation.
„
Vertical orientation
z
When using in the vertical orientation, align the vent of
the burner with that of the provided stand, then place
and fix the burner securely on the stand.
Inserting a Disc
„
Vertical orientation
„
Horizontal orientation
Preparing the Remote Control
„
To Reinsert the Battery
z
Pull out the battery holder by pressing the lock tab.
Lithium Battery
(CR2025)
Lock Tab
CU-VD40A_009_EN.book Page 7 Thursday, April 19, 2007 4:52 PM