EN-13
1
Remove the camcorder’s connector
cover as indicated by
1
,
2
.
• In
2
, rotate the cover in the direction
indicated by the arrow, then remove it.
• After use, follow
3
,
4
to re-attach the
cover.
2
Insert the tips of the metal fittings on
the Power Grip deep into the corre-
sponding slots on the camcorder (
1
),
then attach the case (
2
).
3
Turn the unit around, then turn the screw
in the direction indicated by the arrow.
• Continue turning the screw until it stops.
4
Connect the DC Plug on the Power
Grip to the DC Input Connector on the
camcorder.
• Do not pull on the DC Cord, as this can
result in malfunctions.
1
Detach the pad.
2
While holding the camcorder securely,
adjust the grip band on the Power Grip.
• Adjust so your thumb can easily reach the
Zoom Lever and the RECORDING START/
STOP button.
3
Re-attach the pad.
Pad
Grip Band
Adjust The Grip Band
