JVC Connected Cam GY-HC500E, Instructions Manual

Page: 80 / 268

Setting the User’s Bit
You can add the date, time or an 8-digit
hexadecimal number as the user’s bit to the
recorded image.
Selecting a Recording Mode
Recording date/time information to the user’s
bit
1
Set [TC/UB]
B
[UB Mode] to “Date” or
“Time”, and press the Set button (
R
).
(
A
P126 [ UB Mode ] )
The date or time information is recorded to the
user’s bit.
Memo :
0
When “Date” or “Time” is set, [Preset] appears
as “-” and cannot be set.
0
“Time” is displayed in the 24-hour format.
Presetting the User’s Bit
Recording arbitrary information (8-digit
hexadecimal) to the user’s bit
1 Set [TC/UB]
B
[UB Mode] to “Preset”, and
press the Set button (
R
).
(
A
P126 [ UB Mode ] )
.
1
TC/UB
UB Mode
Preset
Time
Preset
Date
Memo :
0
When [TC/UB]
B
[TC Generator] is set to
“Regen”, the parameter is displayed as
“<Regen>” and cannot be selected.
(
A
P125 [ TC Generator ] )
2 Select [TC/UB]
B
“Preset” and press the Set
button (
R
).
The [Preset] setting screen appears.
3
Use the cross-shaped button (
HI
) to place
the cursor at the item to set, then use the
cross-shaped button (
JK
) to change the
values.
Numbers between 0 and 9 or alphabets
between A and F can be specified for the user’s
bit.
.
TC/UB
Cursor
Memo :
0
Press the [OIS/2] button to reset each digit to
“0”. The cursor moves to the left.
4 Check the values and press the Set button
(
R
).
0
The user’s bit is set and the screen returns to
[TC/UB].
0
To cancel the setting, press the [CANCEL]
button.
5 Press the [MENU/THUMB] button.
Returns to the normal screen.
80
Setting the User’s Bit
Shooting