JVC CA-UXQD70S Instructions Manual Download Page 28

Page: 28 / 82

Introduction

(Continued)

Basic Operations of the DVD Player

■

While a disc is being played back

Press .

When playback is stopped in the middle, playback
can be started from the stopped scene.

How to suspend playback

■

While a disc is being played back

Perform any of the following operations during
playback.

* Even if the power is turned off by pressing

after this, the position where playback

has been stopped will be stored.

How to start playback from the stored
position

NOTE

• This function does not work in program playback or

random playback.

• The position where playback starts again may be

a little different from the stopped position.

• When a disc menu is displayed, the resume func-

tion may not work.

• The audio, the subtitle and the angle at that time

are stored as well as the stopped position.

• The stored position will be cleared if the disc tray

is opened. Further, if

is pressed during

playback, "RESUME" appears. If

pressed at this time, "RESUME" will disappear
and the stored information will be cleared.

• Resume function is set to on as the initial

preset. You can set the function to off
(

page 41).

■

While a disc is being played back

Press .

To resume normal playback, press

• Playback cannot be paused by pressing

on the main unit during JPEG disc slide-show.

■

While a disc is paused

Press .

• Each time you press

, picture will be

advanced frame by frame.

• You cannot operate this function with

the main unit.

There are two methods.

■

While a disc is being played back

Press

or .

• Each time you press

, the speed

increases as shown below.

• To restore the normal speed, press

Hold down

• Fast reverse/fast forward search can be car-

ried out only while the button is pressed.

NOTE

• For a DVD VIDEO, DVD VR, VCD or SVCD, no sound

comes out during fast reverse/fast forward search.

• For a CD, MP3, WMA, or DVD AUDIO, sound is

intermittent during fast reverse/fast forward search.

Stopping Playback

Resuming Playback (RESUME)

Press

once.*

Press

to turn off the power.

Change the source to FM/AM or AUX.*

Press .

Pausing Playback

Advancing Picture Frame by

Frame

Fast Reverse/Fast Forward

Search

(only for moving images)

UX-QD70[UB].book Page 25 Monday, August 8, 2005 8:16 PM

Summary of Contents for CA-UXQD70S



















































































Search results

Summary of Contents for CA-UXQD70S

Reviews:

Related manuals for CA-UXQD70S

Brands by name

Popular brands

JVC CA-UXQD70S, Instructions Manual

Search results

Summary of Contents for CA-UXQD70S

Reviews:

Related manuals for CA-UXQD70S

Brands by name

Popular brands