(No.MB049)1-11
3.1.5 Remove the rear panel
(See Fig.8 to 10)
• Prior to performing the following procedure, remove the metal
cover, rear cover and the CD mechanism assembly.
(1) Remove the five screws
G
attaching the rear panel.
(2) Disconnect the card wire from
CN902
on the main board.
(3) Disengage the lower two joints
b
on each side of the rear
panel using a screwdriver and remove the rear panel
backward (The tuner board and the fan will be also
detached.Remove them as needed).
Fig.9
Fig.10
Joint b
Rear panel
Rear panel
Joint b
Summary of Contents for CA-UXP30
Page 27: ... No MB049 1 27 ...
Page 41: ... M E M O ...
