JVC CA-UXL36V, Instructions Manual

Page: 18 / 36

– 15 –
English
Playing Back Discs (CD/CD-R/CD-RW/MP3)
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back only if they are already
“finalized.”
• You can play back your original CD-Rs or CD-RWs
recorded in music CD format or in MP3 format (however,
they may not be played back depending on their
characteristics or recording conditions).
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or if the player’s lens is dirty.
• CD-RWs may require a longer readout time. This is caused
by the fact that the reflectance of CD-RWs is lower than for
regular CDs.
Loading Disc
1
Press SELECT CD
0
on the remote
control (or
0
on the unit).
The unit automatically turns on and the disc
tray comes out.
2
Place a disc correctly on the circle of
the disc tray, with its label side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press SELECT CD
0
on the remote control
(or
0
on the unit) again to close the tray.
Playing Back the Entire CD—Normal Play
■
For audio CDs
1
Load a disc.
2
Press CD
3
/
8
.
The disc tray automatically closes and the first
track of the CD starts playing.
• The CD automatically stops when the last track of the
CD has finished playing.
Continued
CORRECT INCORRECT
/SELECT
CD
To stop playing, press
7
.
To remove the disc, press
0
CD on the remote control (or
0
on the unit).
■
For MP3 discs
1
Load a disc.
The unit searches for the disc (it may take some time),
and the following information appears on the display (the
group title will scrolls on the display).
2
Press
¢
NEXT or PREV
4
(or
¢
NEXT/
PREV
4
on the remote control) to select a
group you want, then press CD
3
/
8
.
The group number, track number and track title will scroll
on the display.
3
Press
¢
NEXT or PREV
4
(or
¢
NEXT/
PREV
4
on the remote control) to select a
track you want to start playback with, then
press CD
3
/
8
again.
Only a maximum of 14 characters (including spaces between words)
can scroll on the display. The exceeding characters will be ignored.
Track number Elapsed playing time
BASS
CD
CD
SELECT
MP3
Group number flashes Track number
MP3
Group title of the first group (scrolling)
MP3
Track number flashes
MP3
Track title of the first group (scrolling)
Total track number Total playing time
EN15-23_UX-L46&36[US&UJ]f 28/5/2002, 3:59 PM 15