manualshive.com logo in svg

JVC CA-UXL30R, Service Manual, Page: 10 / 78

Share
Download
JVC CA-UXL30R Service Manual Download Page 10

1-10

UX-L40R/UX-L30R

Remove the metal cover, the rear cover and the rear 
panel.

Disconnect the card wire from connector CN902, 
CN903, CN904 and CN905 on the main board and 
remove the CD-R/RW mechanism assembly.

1.

Removing the Main board/ the Heat sink 
board                                (See Fig.9 to 11)

Remove the two screws 

I

 to remove the main board.

Disconnect the card wire from connector CN931, 
CN935, CN933, CN934, CN913, CN901, CN900, 
CN917 and CN918 on the main board.(UX-L30RE)

Disconnect the card wire from connector CN931, 
CN935, CN933, CN934, CN913, CN901, CN900 and 
CN917 on the main board.(UX-L40RE)

Remove the band 

f

 and disconnect the card wire 

from connector CN951 on the power transformer 
assembly. Remove the main board / the heat sink 
board from the body.

Release the joint 

e

 of the main board and disconnect 

connector CN944 and CN945 of the heat sink board 
from connector CN915 and CN916 of the main board 
respectively.

2.

3.

3.

4.

5.

Refer to the method of removing the 
CD-R/RW mechanism assembly and 
Fig.8.

REFERENCE: 

Fig.9

CN916

CN900

CN901

CN913

CN934

CN933

CN935

CN951

CN905

CN902

CN904

CD-R/RW mechanism assembly

CN903

CN915

Fig.10(UX-L30RE)

Fig.11

CN945

CN944

Main board

Main board

Main board

Heat sink board

Heat sink board

Power transformer
                 assembly

CN931

I

I

e

CN917
CN918

f

CN900

CN901

CN913

CN934

CN933

CN935

CN917

CN951

Fig.10(UX-L40RE)

f

Main board

Heat sink board

Power transformer
                 assembly

CN931

Summary of Contents for CA-UXL30R















































































Reviews:

No comments