JVC CA-UXH30 Instructions Manual Download | Manualshive

Page: 41 / 60

background image

8

English

Speaker grille

To remove the speaker grille,

insert your fingers at

the top of the speaker grille, pull towards you. Then
pull the bottom towards you.

To attach the speaker grille,

follow the illustration

above.

Connecting Other Equipment

To connect an audio equipment

You can connect audio equipment—used only as a
playback device.

• DO NOT connect any equipment while

the power is on.

• DO NOT plug in any equipment until all

connections are complete.

Be sure that the plugs of the audio cords are colored:
White plugs and jacks are for left audio signals, and
red ones for right audio signals.

Holes

Projections

To remove the speaker grilles

The speaker grilles are removable.

L

R

L

R

To audio output

Audio equipment

Adjusting the Voltage Selector

Before plugging in the unit, set the correct voltage for
your area with the voltage selector on the rear of the
unit.

Use a screwdriver to rotate the voltage selector so the
voltage number the voltage mark is pointing at is the
same as the voltage where you are plugging in the unit.
(See the back cover page.)

DO NOT plug in before setting the voltage
selector on the rear of the unit and all
connection procedures are complete.

NOW you are ready to plug in the unit
and any other connected equipment.

IMPORTANT:

Be sure to check all connections to

be done before plugging the power cord.

This unit can be supplied with power through the AC
IN connector (at home) or the DC IN connector (in a
car).
• Do not connect the unit using the AC IN connector

and the DC IN connector at the same time for safe
and correct use.

To connect the AC power cord

Connect the AC power cord to the AC IN connector
and a wall outlet.

• If the wall outlet does not match the AC plug, use

the supplied AC plug adaptor.

Continued

For playing other equipment through this unit,

connect between the audio output jacks on the other
equipment and AUX jacks by using audio cords (not
supplied).

A C I N

AC power cord (supplied)

2 3 0 V

V O L T A G E

S E L E C T O R

1 2 7 V

1 1 0 V

Voltage mark

EN01-13_UX-H30[UW]f.pm6

03.3.12, 3:38 PM

8

«
...
39
40
41
42
43
...
»

Summary of Contents for CA-UXH30





























































Reviews:

No comments

Related manuals for CA-UXH30

Brand: Ace Pages: 13

Brand: BAS-IP Pages: 18

Brand: QFX Pages: 3

Brand: Jabra Pages: 2

Brand: iHome Pages: 3

Brand: iHome Pages: 2

Brand: iHome Pages: 17

Brand: Vandersteen Audio Pages: 12

Brand: iHome Pages: 1

Brand: Jensen Pages: 2

Brand: Rafiki Protection Pages: 32

Brand: Samsung Pages: 29

Brand: LD Pages: 16

Nucleus Reference 3.5

Brand: Anthony Gallo Acoustics Pages: 20

NS-R2111 - Simulated Rock Outdoor Speakers Speaker

Brand: Insignia Pages: 2

Brand: Xoro Pages: 21

Brand: Tokai Pages: 20

Brand: Aiphone Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands