28
To move the character entry position
To erase a character
When the character entry position is on the character you
want to erase...
To enter a space
Select the space from “Symbols.” (See “Available
Characters” on page 27.)
• You can also enter a space at the end of a title by pressing
3
.
To quit title entry
• The entered titles are not stored.
Erasing the Tracks or Groups
Remote
ONLY
You can erase tracks/groups on the USB device.
• Once the tracks are erased, you cannot resume them.
• To go back to the previous step, press CANCEL (while
holding SHIFT).
• To quit erasing, press
7
.
1
Start and stop playback of the USB device.
Move the entry position to the right.
Move the entry position to the left.
(while holding...)
2
Select a track/group you want to erase.
To select a track:
To select a group:
3
Select the track/group title erase mode.
4
Confirm the selection.
5
Erase your selection.
(while holding...)
(Canceled)
(while holding...)
EN25-36_UX-G500V[U]1.indd 28
EN25-36_UX-G500V[U]1.indd 28
3/11/08 12:58:16 PM
3/11/08 12:58:16 PM