6
Daily Operations
—Playback
1
Turn on the power.
The STANDBY lamp on the main unit turns off.
2
Select the source.
Playback automatically starts if the selected source is
ready to start.
• If you select TAPE as the source, press
3
on the
main unit to start playback. (See page 9.)
• If you select AUDIO IN, start playback on the
external device.
3
Adjust the volume.
4
Operate the target source as
explained later.
To turn off (standby) the System
2
1
3
4
1
3
CD
2
PROGRAM
TUNING/
PTY
K
,
5
PRESET
1
,
y
,
4
,
x
STOP
7
The STANDBY lamp on the main unit
lights up.
• A small amount of power is always
consumed even while on standby.
DO NOT turn off (standby) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound may
damage your hearing and/or speakers when
you turn on the System or start playback
again.
UX-G110[B]_f.BOOK Page 6 Wednesday, July 22, 2009 10:02 AM