JVC CA-MXKA6 Service Manual Download

Page: 13 / 63

MX-KA6

1-13

Fig.20

Fig.19

Front panel
assembly

Earphone jack
PCB

Front panel
assembly

Control/FL

KEY 2
PCB

KEY 1
PCB

PCB

Fig.21

Removing the cassette deck mechanism

(See Fig.19)

Prior to performing the following procedures, remove

the top cover.

Also remove the CD changer unit.

Also remove the front panel assembly.

1. Remove six screws

retaining the cassette deck

mechanism.

Removing the earphone jack PCB

(See Fig.20)

Prior to performing the following procedures, remove

the top cover.

Also remove the CD changer unit.

Also remove the front panel assembly.

1. Remove the screw with the washer,

that

retains the earphone jack PCB.

Removing the control/FL PCB

(See Fig.21)

Prior to performing the following procedures, remove

the top cover.

Also remove the CD changer unit.

Also remove the front panel assembly.

1. Remove six screws

that retain the control/FL PCB

from the back of the front panel unit.

Summary of Contents for CA-MXKA6
































































Search results

Summary of Contents for CA-MXKA6

Reviews:

Related manuals for CA-MXKA6

Brands by name

Popular brands

JVC CA-MXKA6, Service Manual

Search results

Summary of Contents for CA-MXKA6

Reviews:

Related manuals for CA-MXKA6

Brands by name

Popular brands