JVC CA-MXK10, Service Manual

Page: 15 / 108

1-15
Fig.28
Fig.29
Prior to performing the following procedures,
remove the top cover and both sides board.
Also remove the CD changer unit.
Also remove the front panel assembly.
1.
2.
3.
4.
Remove the five screws "z" retaining the cassette
deck mechanism.
Remove the cassette deck mechanism.
Remove the two screws "t" retaining the main
motor from the front side of the cassette deck.
From the backside of the cassette deck, remove
the main motor and two main belts.
Removing the cassette deck main
motor, and replacing the main belts
(See Fig.22, 28 and 29)
Fig.30
[Caution]
[Caution]
After attaching the main motor, check the
orientation of the motor and the polarity of
the wires.
The lengths of the cassette A (playback
only) and cassette B (record/play) main
belts are different. When attaching the
main belts, use the longer belt for
cassette A.
Prior to performing the following procedures,
remove the top cover and both sides board
Also remove the CD changer unit.
Also remove the front panel assembly.
1.
2.
3.
4.
5.
Remove the five screws "O" that retain the cassette
deck mechanism.
Remove the cassette deck mechanism.
Turn the cassette deck mechanism upside down.
Remove the solder from around the leaf switches.
Pull out the leaf switches from the front side of the
cassette deck mechanism.
Removing the leaf switches of the
cassette deck mechanism
(See Fig.22 and 30)
Cassette deck mechanism
(Back side)
Solder side of leaf switch
t
Cassette deck mechanism
(Front side)
Cassette deck mechanism
(Back side)
Cassette deck main motor
Main belt
(For A cassette) Main belt
(For B cassette)