background image

– 8 –

English

FM 75    COAXIAL

AM 

ANT

AUX

SPEAKERS

IMPEDANCE 6-16 OHMS

  

R

+

L

I N

+

R

L

Connecting Other Equipment

You can connect an audio equipment — used only as a
playback device.
When you connect and use this equipment, refer also to its
manual.

Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.

• DO NOT connect any equipment while the power

is on.

• DO NOT plug in any equipment until all

connections are complete.

To connect audio equipment

Connect the audio output jacks on the other equipment and
the AUX IN jacks on the rear, using an audio cord (not
supplied).

To audio output

NOW, you can plug in the unit and other
connected equipment FINALLY!

To a wall outlet

Audio equipment

FM 75    COAXIAL

AM 

ANT

AUX

SPEAKERS

AC  CORD

IMPEDANCE 6-16 OHMS.

R

+

L

I N

+

R

L

To start the display demonstration

Press DEMO while the unit is turned off (on
standby).

To stop the display demonstration, press any button.

COUNTER

RESET

DEMO

EN01-13.CA-MXJ150R[E]/f

00.5.22, 2:25 PM

8

Summary of Contents for CA-MXJ150R







































Reviews: