15
English
One Disc play
When 2 or 3 CDs are loaded on the disc trays, you can
select one particular disc to be played back.
On the unit ONLY:
1
Load CDs.
• If the current playing source is not the CD player,
press CD
6
, then
7
before going to the next step.
2
Press REPEAT repeatedly so that
the 1 DISC indicator lights up on
the display.
• Each time you press the button, the indication on the
display changes as follows:
*
See page 19.
3
Press one of the disc number
buttons (CD1, CD2 or CD3)
you want to listen.
Playback stops when all tracks of the
selected disc are played once and
resumes to All Disc play.
To stop during play,
press
7
.
• For MP3 disc, this unit can store the number of the track
that you have stopped playback. By pressing CD
6
,
you can start playback again from the beginning of the
same track—Resume play (see also page 17).
To remove the disc,
press CD
0
.
To exit from One Disc play,
press REPEAT repeatedly so
that ALL DISC indicator lights up on the display.
The following operations will also cancel the One
Disc play and restore All Disc play when—
• Stopping playback,
• Turning off the power,
• Ejecting the carrousel, or
• Changing the source to play.
REPEAT ALL DISC
*
REPEAT 1 DISC
*
REPEAT 1
*
1 DISC
ALL DISC
(initial setting)
1 DISC
TRACK
WOOFER
1 DISC indicator
Basic CD Operations
While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press DISC CHANGE to change the CD and the
carrousel comes out.
If you change CDs during play, the current play
will not stop until all CDs you have changed are
played.
To close the carrousel,
press DISC CHANGE or CD
0
.
To skip to the another CD in the carrousel
Press DISC SKIP on the remote control.
To stop play for a moment
Press CD
6
.
While pausing, “PAUSE” appears on the display.
To resume play,
press CD
6
again.
To locate a particular point in a track
During play, press and hold
¡
or
1
.
•
¡
: Fast forwards the disc.
•
1
: Fast reverses the disc.
When using the remote control, press
and hold
¢
/
¡
or
4
/
1
.
To go to another track
For Audio CD:
Press
¢
or
4
before or during
playback.
•
¢
: Skips to the beginning of the
next or succeeding tracks.
•
4
: Goes back to the beginning of
the current or previous tracks.
When using the remote control,
press
¢
/
¡
or
4
/
1
.
If you press
¢
or
4
(or
¢
/
¡
or
4
/
1
on the
remote control) to select a track while playback is
stopped
The selected track starts playback.
EN_MXGB6&5[C]_13-17.p65
04.1.21, 6:18 PM
15
