– 16 –
English
Playing at Random—Random Play
The tracks of all loaded CDs will be played at random.
• To use Repeat Play (see page 17) for Random Play, press
REPEAT after starting Random Play. Only REPEAT 1 and
REPEAT ALL can be selected for Random Play.
1
Load CDs.
• If the current playing source is not the CD player, press
CD
3¥8
, then
7
before going to the next step.
2
Activate the Random Play mode.
On the unit:
Press CD PLAY MODE repeatedly
until “CD RANDOM” appears on
the display.
• Each time you press the button, the play
mode changes as follows:
On the remote control:
Press RANDOM so that
“CD RANDOM”
appears on the display.
• The RANDOM indicator also lights up on the display.
3
Press CD
3¥8
.
The tracks are randomly played.
Random Play ends when all the tracks
are played once.
To skip the currently playing track, turn
4
/
¢
to the
right (or press
¢
(
¡
) on the remote control).
If you turn
4
/
¢
to the left (or press
4
(
1
) on
the remote control)
• You cannot go back to the previous tracks during Random Play.
• You can only restart the current playing track.
To stop playing, press
7
.
• Random play also stops when one of the disc trays is opened.
To exit from Random Play mode, press CD PLAY MODE
(or press RANDOM on the remote control) repeatedly until
the RANDOM indicator goes off after playback stops.
To check the program contents
On the remote control ONLY:
Before playing, you can check the
program contents by pressing
4
(
1
) or
¢
(
¡
).
•
4
(
1
) : Shows the programed
tracks in the reverse order.
•
¢
(
¡
) : Shows them in the programed order.
To modify the program
Before or after playing, you can erase the last
programed tracks by pressing CANCEL/DEMO
(or press PROGRAM CANCEL on the remote
control).
• Each time you press the button, the last
programed track is erased from the program.
To add tracks in the program before playing, simply select
the track numbers you want to add by following step
4
of the
programming procedure on page 15. If you want to add tracks
from another disc, follow steps
3
and
4
.
To erase the entire program before or after playing, press
and hold
7
until “CD PROGRAM” appears on the display.
• The program you have made will be erased,
– when you unplug the AC power cord, or
– when a power failure occurs.
PROGRAM
CANCEL
CANCEL / DEMO
CD PLAY
MODE
RANDOM
CD
Continued
CD PROGRAM
Total track number and
total playing time (Continuous Play)
CD RANDOM
R A N D O M
1
2
3
4
5
6
7
8
9 10 11 12
EN13-18.CA-HXZ1[UW]f.pm6
4/15/02, 7:07 PM
16
