JVC CA-HXGD8 Page 15 Service Manual Download

Page: 15 / 111

(No.MB188)1-15

3.1.12 Removing the primary board

(See Figs.19, 21, 22, 24 and 25)

• Prior to performing the following procedures, remove the metal

cover, tuner, video board, rear panel and main board.

(1) From the top side of the main body, release the wire holder

bundling the wire. (See Fig.19.)

(2) Disconnect the wires from the connectors (

CN206

CN208

CN214

) on the bridge board. (See Fig.19.)

Reference:

After connecting the wire to the connector

CN214

, fix the

wire with the wire holder. (See Fig.19.)

(3) Disconnect the parallel wires from the connectors (

CN201

CN205

CN213

) on the bridge board. (See Fig.19.)

(4) Release the wire holder holding the card wire. (See

Fig.19.)

(5) Remove the spacer fixing the wire on the bridge board.

(See Fig.19.)

(6) From the both sides of the main body, remove the two

screws

attaching the 5DVD changer mechanism assem-

bly to the front panel assembly. (See Figs.21 and 22.)

Reference:

It is not necessary to remove the bridge board from the
5DVD changer mechanism assembly.

(7) Take out the 5DVD changer mechanism assembly with the

bridge board from the main body.

Reference:

When attaching the 5DVD changer mechanism assem-
bly, pass the wires through the sections (

) of the

5DVD changer mechanism assembly. (See Fig.22.)

(8) From the top and left sides of the main body, remove the

four screws

and screw

attaching the primary board on

the chassis base. (See Figs.24 and 25.)

(9) From the forward side of the primary board, disconnect the

power cord from the connector

CN200

. (See Fig.25.)

Fig.24

Fig.25

3.1.13 Removing the FL board

(See Fig.26)

• Prior to performing the following procedures, remove the metal

cover and front panel assembly.

(1) From the inside of the front panel assembly, remove the

soldered sections (

) on the FL board to remove the par-

allel wires.

(2) Disconnect the card wire from the connector

CN902

on the

FL board.

(3) Remove the four screws

attaching the FL board.

Reference:

When attaching the FL board, align the projections

of the

front panel assembly in the holes of the FL board before at-
taching the screws

Fig.26

Primary board

Chassis base

Primary board

Chassis base

Power cord

CN200

Front panel assembly

Card wire

FL board

Parallel wire

CN902

Summary of Contents for CA-HXGD8
















































































































Search results

Summary of Contents for CA-HXGD8

Reviews:

Related manuals for CA-HXGD8

Brands by name

Popular brands

JVC CA-HXGD8, Service Manual

Search results

Summary of Contents for CA-HXGD8

Reviews:

Related manuals for CA-HXGD8

Brands by name

Popular brands