43
USB Operations:
Unable to play back through the USB connection.
]
USB connection and setting is incorrect (see page 14).
The sound through the USB connection stops.
]
Noise and static electricity may stop the sound through the
USB connection. In this case, do the following operations:
• Disconnect and connect the USB cable again
• Restart the music software on your PC
• Turn off and on the system
Timer operations:
Daily Timer does not work.
]
The System has been turned on when the on-time comes.
Timer starts working only when the System is turned off.
OPTICAL DIGITAL OUTPUT Signals
*
While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the
DIGITAL OUTPUT (OPTICAL) terminal if the discs are not copy-protected.
If you still have a problem, reset the System.
While in standby...
Press and hold until the display flashes.
The factory default settings are restored and all the settings you have made are
erased.
DIGITAL AUDIO
OUTPUT
Output Signals
Playback disc
STREAM/PCM
DOLBY DIGITAL/PCM
PCM ONLY
DVD VIDEO
with 48 kHz, 16/20/24 bit
Linear PCM
48 kHz, 16 bit Linear PCM*
1
with 96 kHz, Linear PCM
48 kHz, 16 bit Linear PCM
with Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
with DTS Digital Surround
DTS bitstream
48 kHz, 16 bit Linear PCM
DVD-R/-RW in DVD-VR format
with 48 kHz, 16/20/24 bit
Linear PCM
48 kHz, 16 bit Linear PCM*
with Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
SVCD, VCD, CD
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
CD with DTS Digital Surround
DTS bitstream
44.1 kHz, 16 bit Linear PCM
MP3/WMA disc
No output
Main Unit
ONLY
HX-D7[J]_f.book Page 43 Thursday, February 16, 2006 3:41 PM
