26
6
Press
UP or DOWN to set the
volume level, then press CLOCK/
TIMER.
• You can select the volume level between
“VOLUME – –” and “VOLUME 0” to
“VOLUME 40.”
If you select “VOLUME – –,” the volume
level is set to the current volume.
• To turn off the volume while the Recording
Timer is working, set the volume level to
“VOLUME 0.”
The selected timer mode indicator (
DAILY
or
REC
) stops
flashing.
The unit enters the clock setting mode.
7
Adjust the clock if needed.
• See “Setting the Clock” on page 9.
8
Press STANDBY/ON
to turn off the unit
if the unit is on.
When the timer turns on the unit, the
(timer) indicator and
the selected timer mode indicator (
DAILY
or
REC
) start
flashing.
To deactivate the timer temporarily,
press and
hold CLOCK/TIMER until the
(timer) indicator
and the selected timer mode indicator (
DAILY
or
REC
) go off.
To activate and change the timer,
repeat steps
1
to
7
on
pages 25 and 26.
• Deactivate the timer first in the following cases:
– If you want to change the Daily Timer setting
– If you want to change the Recording Timer setting before
the Recording Timer works.
• To activate the timer again without changing the setting,
press CLOCK/TIMER repeatedly until the
(timer)
indicator and the selected timer mode indicator (
DAILY
or
REC
) light up on the display.
If the unit is already turned on when the timer-on time
comes
The timer does not works.
When you unplug the AC power cord or if a power
failure occurs
The timer will be canceled. You need to set the clock first, then set
the timer again.
When you have selected “CD PROGRAM” in step
5
Do not press DISPLAY while the unit is in standby mode to turn off
the clock indication (“DISPLAY OFF”); otherwise, the program
contents is cleared and playback starts in the Continuous Play mode
when the timer-on time comes.
4
Press
UP or DOWN to select
the timer mode (the Daily Timer
or the Recording Timer) and the
source to play, then press
CLOCK/TIMER.
• Each time you press
UP or
DOWN,
the timer mode and the source to play
change as follows:
•
“DAILY TIMER CD”:
plays the selected disc or your
program. (Daily Timer)
• Load a disc or make the program.
=
go to step
5
.
•
“DAILY TIMER TAPE”:
plays a tape. (Daily Timer)
• Make sure that the tape is in the cassette deck.
• Make sure that the tape direction is correct.
=
go to step
6
.
•
“DAILY TIMER TUNER”:
tunes in to the last station
you have been listening to. (Daily Timer)
=
go to step
6
.
•
“REC TIMER TUNER”:
records the last station you
have been listening to. (Recording Timer)
• Put a recordable cassette into the deck.
• Make sure that the tape direction and the Reverse
Mode are correct.
=
go to step
6
.
5
When selecting “DAILY TIMER CD” in step
4
, select the disc number to play or Program
Play.
1) Press
UP or
DOWN to select the
disc number or Program Play.
• Each time you press the button, the
indication on the display changes as
follows:
•
“CD DISC 1” – “CD DISC 5”:
plays the selected
disc.
•
“CD PROGRAM”:
plays the program you have
made.
2) Press CLOCK/TIMER.
The unit enters the volume level setting mode.
UP
DOWN
CLOCK/
TIMER
CD DISC 1
CD DISC 2
CD DISC 3
CD PROGRAM
CD DISC 5
CD DISC 4
UP
DOWN
CLOCK/
TIMER
CLOCK/
TIMER
DAILY TIMER
CD
DAILY TIMER
TAPE
DAILY TIMER
TUNER
REC TIMER
TUNER
CLOCK/
TIMER
UP
DOWN
Continued
25_27FS_B70[J].p65
03.3.11, 5:57 PM
26
