manualshive.com logo in svg

JVC CA-EXD5, Instructions Manual

Share
Download
JVC CA-EXD5 Instructions Manual Download Page 89

36

If noise comes during playback through the 
wireless connection

Press CHANNEL on the transmitter to change the 
frequency band.

By pressing CHANNEL for more than 3 seconds, 
you can search for the available frequency band 
automatically.

If no sound comes from the speakers, check 
the following items:

• check the transmitter is detected properly as 

follows: open the Control Panel on your PC, 
select [Sounds and Audio Devices] 

=

 [Audio] 

tab 

=

 [Sound playback] 

=

 [Default device], and 

check [Default device] is set to [USB Speaker]*.

• check the playback software on your PC is 

compatible with the USB device.

• select “WIRELESS” as the source.
• adjust the volume level on the system.

NOTE

* English version of Windows XP

R

 is used for the 

explanation. If your PC is running on a different 
version of operation system or language, the 
description may differ.

For Windows

R

 98/98SE:

 open the Control Panel, 

select [Multimedia], choose [AUDIO] at Playback 
section, and make sure [USB Audio Device] is 
selected.
If you are playing back CD from your DVD/CD-ROM 
at [Multimedia] properties, select [CD Music] and 
click on to the box indicating [Enable digital CD 
audio for this CD-ROM device].

If the system keeps displaying “SEARCHING” 
while the transmitter is connected to the PC, 
check the following items:

• keep proper distance between the system and 

your PC.

• no obstacles in between the transmitter and the 

main unit.

If the system still displays “SEARCHING,” follow 
the procedure below.
• Make sure the transmitter is connected to the 

PC:

1

While pressing and holding 

7

, press 

STANDBY/ON 

 on the main unit.

The system enters “ID learning” mode.
The indicator behind the door starts flashing 
fast.

• In 20 seconds:

2

Press and hold ID on the transmitter.

When the ID Learning is successful, the 
indicator behind the door stops flashing and 
lights up (“ID SYNC OK” is displayed).

* Microsoft

R

, Windows

R

 98/98SE, Windows

R

 Me, 

Windows

R

 2000 and Windows

R

 XP are registered 

trademarks of Microsoft corporation.

Behind the door

USB WIRELESS TRANSMITTER

ID

CHANNEL

Using USB wireless transmission (continued)

EX-D5[C]-f.book  Page 36  Tuesday, May 24, 2005  1:58 PM

Summary of Contents for CA-EXD5

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands