JVC BC72, Service Manual

Page: 14 / 66

VS-DT7R
13
2.3.4 Removing the traverse mechanism assembly
(See Fig. 2-24.)
• Remove the CD servo board.
(1) Remove the two screws C attaching the CD servo board
bracket.
(2) Remove the two screws D attaching the traverse mecha-
nism assembly.
(3) Disengage the claw e attaching the traverse mechanism
assembly and then take out the traverse mechanism as-
sembly.
Fig.2-24
2.3.5 Removing the pickup unit
(See Figs. 2-25 and 2-26.)
• Remove the CD servo board.
• Remove the traverse mechanism assembly.
(1) From the top side of the traverse mechanism
(1) assembly, remove the two screws
E attaching the
shaft.
(2) From the traverse mechanism assembly, disengage the
section f of the pickup unit and then remove the pickup unit
with the shaft.
(3) Pull the shaft out of the pickup unit.
(4) Remove the screw
F attaching the rack plate from the
pickup unit.
(5) Remove the screw G attaching the P.S. spring from the
pickup unit.
Fig.2-25
Fig.2-26