55
EXT SETTING
AV28X10EK/EI/ LCT0893-001A-U/ English
■
■
■
■
'8%%,1*
'8%%,1*
'8%%,1*
'8%%,1*
You can choose a signal source to be output from the EXT-2
terminal.
You can do this with the output signal of the device connected
to another EXT terminal, or the picture and sound from a TV
channel you are currently viewing.
1
Press the
ì
buttons to choose the arrow
from the menu.
2
Press the
ë
buttons to choose another
EXT terminal or TV.
The arrow in the menu represents a signal flow. The left
side of the arrow shows a signal source output from the
EXT-2 terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected to an EXT
terminal passes through the TV and is output from the
EXT-2 terminal.
TV:
The picture and sound of the TV channel you are
currently viewing are output from the EXT-2 terminal.
3
Press the
á
button to complete the
setting.
The menu disappears.
•
During dubbing, you should not turn off the TV.
Turning off the TV also turns off the output from the
EXT-2 terminal.
•
When you choose an EXT terminal as an output, you
can view a TV programme or a picture from the other
EXT terminal while dubbing the picture from a
device connected to the EXT terminal onto a VCR
connected to the EXT-2 terminal.
•
The RGB signals from TV games cannot be
output.Teletext programmes cannot be output.
EXT-1
BACK
EXT SETTING
TV
OK
DUBBING
EXT-2
EXT-4
TV
D0022-EK
EXT-3
EXT-1
BACK
EXT SETTING
TV
OK
DUBBING
EXT-2
EXT-4
TV
EXT-3
EXT-1
BACK
EXT SETTING
TV
OK
DUBBING
EXT-2
EXT-4
TV
EXT-3
EXT-1
BACK
EXT SETTING
TV
OK
DUBBING
EXT-2
EXT-4
TV
EXT-3
English.book Page 22 Tuesday, March 6, 2001 3:16 PM
