No. 51941
AV28R25EKS
AV28R250EKS
16
(3)
Method of Setting
1) Method of Setting
1.IF
[VCO]
①
1 Key
･･･････ ･････････････ ･････
Select 1.IF.
②
The VCO (CW) screen will be displayed in yellow when the AFC voltage is at a certain level and in blue when it is at other levels.
③
INFORMATION Key
･･･････ ･････
Return to the SERVICE MENU screen.
2) Method of
s etting
2.V/C, 3.AUDIO, 4.DEF
and
5.VSM PRESET.
①
2
～
5 Key
･･･････ ･････････････ ･･
Select one from
2.V/C, 3.AUDIO, 4.DEF
and
5.VSM PRESET
.
②
FUNCTION UP / DOWN Key
････
Select s etting items.
③
FUNCTION -/+
･･･････ ･･････････
Set (adjust) the setting values of the setting items.
(Use the number keys of the REMOTE CONTROL UNIT for s etting of WHITE BALANCE.
For the s etting, refer to each item concerned.)
④
MENU Key
･･･････ ･････････････
Memorize the s etting value.
(Before storing the s etting values in memory, do not press the CH, TV, POWER ON / OFF key -
if you do, the values will not be stored in memory.)
⑤
INFORMATION Key
･･･････ ･････
Return to the
SERVICE MENU
screen.
3) Method of
s etting
6.VPS
and
7.SHIPPING
.
6.VPS
･･･････ ･････････････ ･･･････
This mode displayed monitor of VPS systems.
(Do not adjust)
7.SHIPPING
･･･････ ･････････････ ･
When the MAIN POWER is turned on with the state of SHIPPING ON, you get a mode that
initializes every existing set value including language selection. Because this mode is set at the
fac tory upon completion of the adjustment, you need not to us e it for service.
(Do not adju st in this mode.)
(4)
Release of SERVICE MENU
1) After completing the setting, return to the SERVICE MENU, then again press the INFORMATION key.
