NOTES:
Initial Setup Menu
items
• Auto Tuner Setup,
and
• Tuner Mode are
described in
detail on page 15
in the Plug In
Menu section.
In the Channel
S u m m a ry :
To move up and
down a column
(e.g. from channel
to channel) use the
C
H A N N E L
- / + button.
To move from item
to item (e.g. from
channel number to
add to lock) use
the arrow up/down
keys.
You can add or delete channels from
channel scanning. You can also lock
out any “unauthorized” viewers from
one or up to all 181 channels.
To CHANNEL SUMMARY
To operate
Note:
Noise Muting will not work while
you are in the Channel Summary
menu
.
SCAN
You can manually set channels to scan
that were too weak to be picked up
during Auto Tuner Setup. Conversely, if
a channel was too weak to receive a
good picture but was picked up
anyway, delete it by removing the
√
.
(If
you have not performed the Auto Tuner
Setup described on page 15, do so
now.)
C
H A N N E L
- / + to select the channel
To the SCAN column
To include or delete from scan
E
XIT
when finished
Note:
Channels set to scan will be
marked with a
√
.
Note:
Some cable systems experience
interference from radio frequen-
cies on Cable Channel 95. If
you like, you can delete this
channel f rom scanning by
removing the
√
.
CH NO. SCAN CH NO. SCAN
06
√
0 2
√
07
0 3
√
08
0 4
√
09
√
0 5
√
10
√
CHANNEL GUARD - LOCK
To CHANNEL SUMMARY
To operate
To the Lock column
The access code zero (0) to
lock or unlock that channel
Use the C
HANNEL
-/+ button to go to any
other channel you want to lock
E
XIT
when finished
CHANNEL GUARD MESSAGE:
This message appears when a viewer
attempts to watch a guarded channel:
To watch a channel you have locked,
enter the lock code using the 10 key
pad.
If the wrong lock code is entered, this
message will appear:
I N VALID LOCK CODE !
T H IS CHANNEL IS LOCKED BY
CHANNEL GUA R D .
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. _ _ _
I N I T I A L S E T U P
2
1
CH NO. SCAN CH NO. SCAN
06
√
0 2
√
07
0 3
√
08
0 4
√
09
√
0 5
√
10
√
Continued above…
Continued from below…
