1-26 (No.YA193)
CORNER PIN
adjustment
Signal
generator
Remote
control unit
[4. DEF]
8. COR-UP
9. COR-LO
- PAL CORNER PIN -
(1) Receive a PAL crosshatch signal.
(2) Select
8. COR-UP
.
(3) Set the initial setting value of
8. COR-UP
.
(4) Select
9. COR-LO
.
(5) Set the initial setting value of
9. COR-LO
.
(6) Adjust
8. COR-UP
and
9. COR-LO
so that the
vertical lines at the four corners on the screen are
straight.
- NTSC CORNER PIN -
(1) Receive a NTSC crosshatch signal.
(2) Make similar adjustment of NTSC CORNER in the
same way as for "PAL CORNER".
H. PARALLEL
adjustment
Signal
generator
Remote
control unit
[4.DEF]
10. ANGLE
- PAL H. PARALLEL -
(1) Receive a PAL crosshatch signal.
(2) Select
10. ANGLE
.
(3) Set the initial setting value of
10. ANGLE
.
(4) Adjust
10. ANGLE
to optimize the trapezium
distortion at the centre of the screen.
- NTSC H. PARALLEL -
(1) Receive a NTSC crosshatch signal.
(2) Make similar adjustment of NTSC H. PARALLEL in
the same way as for "PAL H. PARALLEL".
H. BOW
adjustment
Signal
generator
Remote
control unit
[4.DEF]
11. BOW
- PAL H. BOW -
(1) Receive a PAL crosshatch signal.
(2) Select
11. BOW
.
(3) Set the initial setting value of
11. BOW
.
(4) Adjust
11. BOW
to optimize the horizontal arc
distortion.
- NTSC H. BOW -
(1) Receive a NTSC crosshatch signal.
(2) Make similar adjustment of NTSC H. BOW in the
same way as for "PAL H. BOW".
(3) Press the [DISPLAY] key twice to return to the
normal screen.
Item
Measuring
instrument
Test point
Adjustment part
Description
Straigt
Parallel
Straight
