1-28 (No.YA280)
SIDE PIN
adjustment
Signal
generator
Remote
control unit
[4. DEF]
7. EW-PIN
- PAL SIDE PIN -
(1) Receive a PAL crosshatch signal.
(2) Select
7. EW-PIN
.
(3) Set the initial setting value of
7. EW-PIN
.
(4) Adjust
7. EW-PIN
so that the first vertical lines at the
left and right edges on the screen are straight.
- NTSC SIDE PIN -
(1) Receive a NTSC crosshatch signal.
(2) Make similar adjustment of NTSC SIDE PIN in the
same way as for "PAL SIDE PIN".
TRAPEZIUM
adjustment
Signal
generator
Remote
control unit
[4. DEF]
6. TRAPEZ
- PAL TRAPEZIUM PIN -
(1) Receive a PAL crosshatch signal.
(2) Select
6. TRAPEZ
.
(3) Set the initial setting value of
6. TRAPEZ
.
(4) Adjust
6. TRAPEZ
so that the vertical lines at the left
and right edges on the screen are in parallel.
- NTSC TRAPEZIUM PIN -
(1) Receive a NTSC crosshatch signal.
(2) Make similar adjustment of NTSC TRAPEZIUM in
the same way as for "PAL TRAPEZIUM".
CORNER PIN
adjustment
Signal
generator
Remote
control unit
[4. DEF]
8. COR-UP
9. COR-LO
- PAL CORNER PIN -
(1) Receive a PAL crosshatch signal.
(2) Select
8. COR-UP
.
(3) Set the initial setting value of
8. COR-UP
.
(4) Select
9. COR-LO
.
(5) Set the initial setting value of
9. COR-LO
.
(6) Adjust
8. COR-UP
and
9. COR-LO
so that the
vertical lines at the four corners on the screen are
straight.
- NTSC CORNER PIN -
(1) Receive a NTSC crosshatch signal.
(2) Make similar adjustment of NTSC CORNER in the
same way as for "PAL CORNER".
(3) Press the [DISPLAY] key twice to return to the
normal screen.
Item
Measuring
instrument
Test point
Adjustment part
Description
Straight
Parallel
Straigt
