1-28 (No.YA263)
H. POSITION
Signal
generator
Remote
control unit
[4.DEF]
3.H-CENT
(1) Receive the circle pattern signal.
(2) Set the ZOOM mode to FULL.
(3) Select
4.DEF
from the SERVICE MODE.
(4) Set the initial setting value of
< 3.H-CENT >
.
(5) Adjust horizontal position to make
A
=
B
.
(6) Press the
[MENU]
key to memorize the set value.
H. SIZE
Signal
generator
Remote
control unit
[4.DEF]
4.H-SIZE
(1) Receive the cross hatch signal.
(2) Set the ZOOM mode to FULL.
(3) Select
4.DEF
from the SERVICE MODE.
(4) Set the initial setting value of
< 4.H-SIZE >
.
(5) Adjust to make sure that the horizontal screen size
of the picture size is in the bellow table.
(6) Make sure that the horizontal screen size of the
each ASPECT mode is in the below table.
(7) Press the
[MENU]
key to memorize the set value.
(8) Input a NTSC VIDEO signal (60Hz) from the EXT
terminal, and make sure that the horizontal screen
size is in the table below.
SIDE-PIN
Signal
generator
Remote
control unit
[4.DEF]
6.EW-PIN
(1) Receive the cross hatch signal.
(2) Set the ZOOM mode to FULL.
(3) Select
4.DEF
from the SERVICE MODE.
(4) Set the initial setting value of
< 6.EW-PIN >
.
(5) Adjust to make the vertical lines at the right and left
edges of the screen straight. Also make sure that
the 3rd vertical lines are straight.
(6) Press the
[MENU]
key to memorize the set value.
Item
Measuring
instrument
Test point
Adjustment part
Description
(A)
(B)
ASPECT MODE
SCREEN SIZE
FULL
PANORAMIC
SUBTITLE
92%
95%
92%
Picture size 100%
Horizontal screen size
Straight
Summary of Contents for AV-28H50SU
Page 41: ...2 4 No YA263 ...
