1-32 (No.52113)
4.7.5
VIDEO CIRCUIT
Item
Measuring
instrument
Test point
Adjustment part
Description
WHITE
BALANCE
(Low Light)
Signal
generator
Remote
control unit
[1.V/C (S)]
S01: BRIGHT
S11: R CUTOFF
S12: G CUTOFF
S13: B CUTOFF
[7.LOW LIGHT]
SCREEN VR
[in HVT]
(1) Receive the black and white signal ( color off ).
(2) Enter the SERVICE MENU.
(3) Select the 1.V/C (S).
(4) Confirm the initial setting value of < S11 > (R
CUTOFF), < S12 > (G CUTOFF), < S13 > (B
CUTOFF) and < S01 > (BRIGHT).
(5) Return the SERVICE MENU and select the 7.LOW
LIGHT.
(6) Display a single horizontal line by pressing the [1]
key.
(7) Turn the SCREEN VR all the way to the left.
(8) Turn the SCREEN VR gradually to the right from the
left until either one of the red, blue or green colors
appears faintly.
(9) Adjust the two colors which did not appear until the
single horizontal line that is displayed becomes
white using the [4] ~ [9] keys.
(10) Turn the SCREEN VR until the single horizontal line
is displayed faintly.
(11) Press the [2] key to cancel the single horizontal line
mode.
(12) Adjust the BRIGHT level to become the black
component shines white slightly.
(13) Confirm that whether the color ingredient of R, G, or
B is visible to the black component, which shines
white slightly.
(14) When the color ingredient can be seen, two colors
other than a visible color are adjusted, and it is made
to look white.
(15) Return the value of < S01 > to initial setting value.
• The [3] (EXIT) key is the cancel key for the WHITE
BALANCE.
REMOTE CONTROL UNIT
H.LINE ON
R CUTOFF
G CUTOFF
B CUTOFF
H.LINE OFF
EXIT
R CUTOFF
G CUTOFF
B CUTOFF
LOW LIGHT adjustment mode
SINGLE HORIZONTAL LINE
BRIGHT
G CUTOFF
B CUTOFF
R CUTOFF
SETTING VALUE
SETTING VALUE
SETTING ITEM
Adjustment item
S11: R CUT OFF
Initial setting value
30
S12: G CUT OFF
30
S13: B CUT OFF
30
S01: BRIGHT
64
