background image

14

No. 52075

AV-21W33
AV-21W33B

SERVICE ADJUSTMENTS

ADJUSTMENT PREPARATION

1.

You can make the necessary adjustments for this unit with either the remote control unit or with the adjustment equipment and parts
as given below.

2.

Adjustment with the remote control unit is made on the basis of the initial setting values, however, the new setting values which set the
screen to its optimum condition may differ from the initial settings.

3. Make sure that AC power is turned on correctly.
4. Turn on the power for the set and test equipment before use, and start the adjustment procedures after waiting at least 30 minutes.
5. Unless otherwise specified, prepare the most suitable reception or input signal for adjustment.
6. Never touch any adjustment parts, which are not specified in the list for this adjustment-variable resistors, transformers, capacitors, etc.
7. Presetting before adjustment.

Unless otherwise specified in the adjustment instructions, preset the following functions with the remote control unit.

Setting item

Setting value

PICTURE MODE(VSM)

BRIGHT

VNR

OFF

BASS, TREBLE, BALANCE

CENTER

TINT, COLOR, BRIGHT, DETAIL

CENTER

PICTURE

MAXIMUM

MEASURING INSTRUMENT

1. DC voltmeter (or Digital voltmeter)
2. Oscilloscope
3. Signal generator (Pattern generator) [NTSC/ PAL]
4. Remote control unit

ADJUSTMENT ITEMS

B1 POWER SUPPLY

FOCUS ADJUSTMENT

IF CIRCUIT ADJUSTMENTS

Adjustment of VCO (CW)
Adjustment of DELAY POINT (AGC TAKE-OVER)

VC (VIDEO/CHROMA) CIRCUIT ADJUSTMENTS

Adjustment of WHITE BALANCE (Low light)
Adjustment of WHITE BALANCE (High light)
Adjustment of SUB BRIGHT
Adjustment of SUB CONTRAST
Adjustment of SUB COLOR-

ΙΙΙΙΙ

Adjustment of SUB COLOR-

ΙΙ

ΙΙ

ΙΙ

ΙΙ

ΙΙ

Adjustment of SUB TINT-

ΙΙΙΙΙ

Adjustment of SUB TINT-

ΙΙ

ΙΙ

ΙΙ

ΙΙ

ΙΙ

 User mode setting position

DEFLECTION CIRCUIT ADJUSTMENTS

Adjustment of V. SLOPE
Adjustment of V. POSITION
Adjustment of V. HEIGHT
Adjustment of H. POSITION
Adjustment of V. S-CURVE

VSM PRESET SETTING

PRESET SETTING

AUDIO ADJUSTMENT

PURITY ADJUSTMENT

CONVERGENCE ADJUSTMENTS

Adjustment of STATIC CONVERGENCE
Adjustment of DYNAMIC CONVERGENCE

Summary of Contents for AV-21W33


































Reviews: