SETTING UP
Batteries
Insert the main plug into a
220 - 240V 50Hz AC (AV-21FT1)
230 - 240V 50Hz AC (AV-21FT1)
power socket.
Open remote control battery compartment (at the
rear) and insert two 1.5V type AA / R6 batteries.
Warning: be careful to respect battery polarities.
START UP
LANGUAGE MENU
PICTURE/OK
P
P
The very first time that you turn on the TV, the
LANGUAGE
menu will appear on the screen.
Its purpose is to enable you to select the language that will be used for all the OSD (On
Screen Display) menus. The user must enter a choice of language before proceeding further.
The descriptions used in the menu are those of the country code (e.g. GB = English, NL =
Holland etc).
Selection is made by use of the remote control
CURSOR UP
(A11) /
CURSOR DOWN
(A12) buttons and
CURSOR LEFT
(A13) /
RIGHT
(A14) buttons. Once you are satisfied with your selection, push the
OK
button (A9) to confirm your choice, and then the menu
will disappear.
The language entered at this stage can still be modified at any later time, by entering the
LANGUAGE
selection (accessed from the
FEATURES
menu page 9).
Note : The languages shown are subject to modification without prior notice.
3
SWITCHING ON
Switch the TV set on with the
MAIN POWER
button (B1).
Connect aerial to aerial jack.
It is usually connected by
means of a 75 ohm cable.
3
ENGLISH
