background image

2

• This unit is not a toy. Keep away from children.

• No user-serviceable parts inside. Do not dismantle.

• Do not expose to direct sunlight, or store the speaker in a car in hot 

   weather.

• Do not expose batteries to heat or fire as they may explode.

• Do not dispose of batteries in your household waste. Contact your local 

   council for information on disposal or recycling.

Charging your Speaker

1. Connect one end of the included USB Charging Cable to the Charging 

Port on your speaker. Then plug the other end of the USB Charging Cable 

into a suitable USB port on your computer or power bank to recharge 

your speaker's internal rechargeable battery. You can also use a suitable 

adaptor for charging.

2. When charging, a red LED light will illuminate to indicate that the unit 

is charging. The red light will turn off when your unit is fully charged

(under both turn-on/off speaker status)

A Quick Look At Your Speaker

1

2 3 4

5

1. Power on/off Button: To power on your speaker, press and hold the 

On/Off Button, then the blue LED will flash quickly. To power off your 

speaker, press and hold the On/Off Button.

2. Previous Song/ Vol - Button: Press and hold to go to the previous song.

Short press to reduce volume.

Summary of Contents for Adventure XS-N1122BA









Reviews: