– 21 –
English
CD Direct Recording
Everything on the CD goes onto the tape in the order it is on the
CD, or according to the order you have made for Program play.
On the unit ONLY:
1
Put a recordable cassette in with the exposed
part of the tape down.
2
Place a disc correctly on the circle of the disc
tray, with its label side up.
• If the current playing source is not from the CD player,
press CD
3
/
8
SELECT to select CD player source, then
press
7
to stop playing.
• If you want to record on both sides of a tape, see “To record
on both sides — Reverse Mode.”
• If you do not want pauses of about 4 seconds recorded
between selections, press CD
3
/
8
SELECT twice. If
nothing is done, non-recorded pause will be automatically
recorded between selections.
CD source should not be playing on its own before recording.
3
Press REC.
The REC indicator lights up on the display and
recording starts.
After recording, the CD player and cassette deck
automatically stop.
To stop CD Direct Recording, press
7
. The tape stops after 4
seconds.
To remove the cassette, press
0
for the cassette deck.
One Track Recording
This recording method is convenient when you record tracks
while playing a CD. You can only record your favorite songs on
the tape.
On the unit ONLY:
1
Put a recordable cassette in with the exposed
part of the tape down.
2
Play the track on the CD you wish to record.
3
Press REC.
The CD player returns to the beginning of that
track and the track is recorded on the tape. After
recording, the CD player and cassette deck
automatically stop.
4
Repeat steps 2 and 3 to record other tracks you
want.
To record on both sides — Reverse Mode
Press REV.MODE on the unit until the
indicator is lit.
• When using the reverse mode for CD Direct
Recording, start recording in the forward (
3
) direction first.
When the tape reaches its end while recording a song in the
forward direction (
3
), the last song will be re-recorded at the
beginning of the reverse side (
2
).
If you start recording on the reverse side (
2
), recording will
stop when recording is done only on one side (reverse) of the
tape.
When making SLEEP timer settings while doing CD
Direct recording
Set enough time to allow for the CD to finish playing, otherwise the
power will go off before recording is completed.
EN20-26.UX-P38[US,UB,UN]
31/07/2001, 10:25 am
21
