7
English |
Tuner
Continued on the next page...
Tuner
Tuner Basic Operation
1
Press the <
> button.
2
Touch [Tuner].
Ñ
Source control screen
2
1
3
1
Displays the information of the current station:
PS name, Frequency, PTY Genre, Indicator Items
2
[FM] :
Switches the FM band.
“FM1”, “FM2”, “FM3”
[AM] :
Switches the AM band.
“AM1”, “AM2”
[
E
]
[
F
] :
Tunes in a station with good
reception automatically.
[
] :
Displays the Tuner Setup screen.
3
Recalls the memorized station.
When touched for 2 seconds, stores the current
receiving station in memory.
Presetting stations
Ñ
Auto memory
You can preset 6 stations for the current band (FM1/
FM2/FM3/AM1/AM2).
1
Touch [FM] or [AM] to select the band.
2
Touch [
].
3
Touch [Auto Store].
The local stations with the strongest signals are
found and stored automatically.
Ñ
Manual memory
You can store the current receiving station in
memory.
1
Tune in to a station you want to preset.
2
Touch and hold [#] (#:1-6) in which you want to
store the station.
Ñ
Recalling the preset station
1
Touch [#] (#:1-6).
Tuner Setup
1
Touch [
].
2
Set each item as follows.
[Auto Store]
Automatically searches and stores the 6 stations with
the strongest signals for the selected band.
“Auto Store” appears.
[Local Seek]
Tunes in only to the stations with sufficient signal
strength. (
LOC
indicator lights up.)
“ON”, “OFF” (Default)
[RDS] *
1
Displays the RDS Settings screen.
[AF]
When station reception is poor, automatically
switches to the station that is broadcasting the
same program over the same Radio Data System
network.
“ON” (Default), “OFF”
[TA]
Switches to the traffic information automatically
when the traffic bulletin starts. (
TI
indicator lights
up.)
“ON”, “OFF” (Default)
[RDS Clock Sync]
Synchronizing the Radio Data System station time
data and this unit’s clock.
“ON” (Default), “OFF”
[PTY]
Select a program type.
[PTY Seek]
Searches for a program by program type.
*1 FM only
3
Touch [
6
].
!B5K-0672-01b_M_EnRuTrChTh.indb 7
2019/07/04 8:47
