8
English
Connecting External Equipment
You can connect other equipment which can be used as a
playback device.
When you connect and use the equipment, refer also to its
manual supplied.
• DO NOT connect any equipment while the
power is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect external equipment
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
To play the other equipment through this unit,
connect
between the audio output jacks on the other equipment and
AUX/DVD jacks by using audio cords (not supplied).
NOW you are ready to plug in the unit and any
other connected equipment.
IMPORTANT:
Be sure to check that all connections have been made
before plugging in the power cord.
Putting the Batteries into the Remote
Control
Insert the batteries—R6S(SUM-3)/AA(15F)—into the remote
control by matching the polarity (+ and –) on the batteries
with the + and – marking on the battery compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.
• DO NOT use an old battery together with a new
one.
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, the remote control will be damaged
from battery leakage.
R6S(SUM-3)/AA(15F)
To audio output
External
equipment
1
2
3
RIGHT
LEFT
AUX/DVD
To AUX/DVD jacks
EN06-08_UX-J55MD[UB]f.p65
7/1/03, 4:29 PM
8
