JVC 0706TNH-II-IM User Manual Download Page 67

Page: 67 / 88

Button Functions

The R

ETURN

+/TV button has three functions:

Return

- Returns to the channel viewed just before the channel currently onscreen.

- Lets you program a specific channel to return to while scanning through the

channels using the CH+ and CH– buttons.

- Returns to the TV mode.

Press the R

ETURN

+/TV and hold for three seconds

The channel currently active has been programmed as your channel. Now scan

through the channels using the C

HANNEL

+/– buttons.

Press the R

ETURN

+/TV

You will return to your programmed channel.

• To cancel your channel, press and hold the R

ETURN

+ button for three seconds. The

message “RETURN CHANNEL CANCELLED!” will appear.

• works only with the /– buttons. Pressing any number key will cancel

/TV

RETURN CHANNEL

PROGRAMMED!

By pressing the S

OUND

button, you can change the A.H.S.+ (Advanced Hyper Surround plus)

mode, VOICE ENHANCEMENT, SMART SOUND or MaxxBass on or off.

A.H.S.+ -

Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.

VOICE ENHANCEMENT -

Gives a clearer sound quality of the voices in what you are

watching.

SMART SOUND -

Decreases high sound levels, giving a regulated sound level.

MaxxBass -

Emphasizes the bass sound

Press the S

OUND

button

†

To select A.H.S.+, VOICE ENHANCEMENT,
SMART SOUND or MaxxBass

√

To choose the setting

Press the M

ENU

when finished

Sound

SOUND EFFECT

SELECT OPERATE

EXIT

A.H.S.+
VOICE ENHANCEMENT
SMART SOUND
MaxxBass

MOVIE MUSIC OFF

ON OFF
ON OFF

HIGH LOW OFF

MaxxBass is a registered trademark of Waves Audio Ltd. in the USA, Japan and other
countries.

Notes:

• Smart Sound may become an unnatural effect, depending on the signal source.
• You can adjust BALANCE only when A.H.S.+ is off.
• When headphones are being used, MaxxBass can not be selected.

LCT2128-001B-A English.indd 67

7/6/06 9:37:34 AM

Summary of Contents for 0706TNH-II-IM

























































































Search results

Summary of Contents for 0706TNH-II-IM

Reviews:

Related manuals for 0706TNH-II-IM

Brands by name

Popular brands

JVC 0706TNH-II-IM, User Manual

Search results

Summary of Contents for 0706TNH-II-IM

Reviews:

Related manuals for 0706TNH-II-IM

Brands by name

Popular brands