JVC 0402-Ki-NV-JMT Instruction Manual Download Page 130

Page: 130 / 212

Turn the main power on

Press the main power button

The POWER lamp

lights red and your TV is

in the standby mode.

To turn the main power off :
press the main power button again.
The POWER lamp

goes off.

Turn the TV on from standby
mode

Press the CHANNEL-/+ buttons

The POWER lamp

lights red to green and

your TV will be turned on.

• You can also turn on the TV by pressing the

TV/VIDEO button

while it is in standby

mode.

Choose a TV channel

Press the CHANNEL-/+ buttons

Choose a VIDEO terminal

Press the TV/VIDEO button

CHANNEL-/+ buttons

Adjust the volume

Press the VOLUME-/+ buttons

The volume level indicater appears.

MENU button

Press to open the menu.
For details, see "Operation with the buttons on
the TV" on page 19.

Remote control sensor
and ECO sensor

ECO lamp

If you set the DIGITAL ECO SENSOR
function to ON or DISPLAY, the ECO lamp lights.

TV buttons and functions

SPATIALIZER ECO POWER

IN (VIDEO-4)

L/MONO

OVER

CHANEL

VOLUME

TV/VIDEO
EXIT

(Behind the cover)

LCT1218-001A-H_p1-21

4/9/02, 6:52 PM

Black

Summary of Contents for 0402-Ki-NV-JMT





















































































































































































































Search results

Summary of Contents for 0402-Ki-NV-JMT

Reviews:

Brands by name

Popular brands

JVC 0402-Ki-NV-JMT, Instruction Manual

Search results

Summary of Contents for 0402-Ki-NV-JMT

Reviews:

Brands by name

Popular brands