26
Set the IP address for this projector. There are 2 methods to set the IP address.
Assigning a static IP address
Assigning an IP address from the DHCP Server
Assigning a static IP address
The
A
IP Address Setting
B
of this projector is set to
A
STATIC IP
B
(the DHCP client function is OFF) by default.
Upon turning on the power, this projector starts running with the following IP address.
IP Address
: 192.168.0.2
Subnet Mask
: 255.255.255.0
Default Gateway
: 192.168.0.254
IP address setting at the computer
Set the computer to an IP address that enables communication with this projector.
1
Click
A
Start
B
and select
A
Control Panel
B
2
Double click
A
Network Connections
B
3
Right-click on
A
Local Area
B
and select
A
Properties
B
●
Check to ensure that the
A
Client for Microsoft Networks
B
and
A
Internet Protocol(TCP/IP)
B
check boxes are selected.
4
Select
A
Internet Protocol(TCP/IP)
B
and click
A
Properties
B
5
Set the IP address
6
Click
A
OK
B
on the
A
Local Area Connection Properties
B
screen
IP Address Settings
A
B
C
E
D
Click
A
OK
B
Set
A
IP address
B
(For example, use 192.168.0.100 when DLA-SH7NL is in its
default settings)
NOTE:
●
Make sure that you take note of the original IP address
before altering.
●
When setting, ensure that a duplicate IP address is not
used within the same network environment.
Set
A
Subnet mask
B
Set to a value that is appropriate for the setting operation.
Clarify with the network administrator if you have any queries.
(Use 255.255.255.0 when the camera is in its default settings)
Select
A
Use the following IP address
B
When a
A
Default gateway
B
is present, make use of the IP
address (e.g., 192.168.0.254)
