ENGLISH
31
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Part list for installation
(A)
Trim plate (×1)
(B)
Wiring harness (×1)
(C)
Flat head screw,
M5 × 8 mm (×8)
(D)
Round head screw,
M5 × 8 mm (×8)
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
terminal of the car battery.
2
Connect the wires properly.
See “Wiring connection” on page 32.
3
Install the unit to your car.
See the following “Installing the unit (in-dash mounting)”.
4
Connect
the terminal of the car battery.
5
Press
SOURCE
B
to turn on the power.
6
Reset the unit. (Page 4)
Installation/Connection
Installing the unit (in-dash mounting)
Install onto the car brackets using the supplied screws
(C)
or
(D)
. The screw holes differ depending on the model of the cars.
Then, install the supplied trim plate
(A)
.
Use only the specified screws. Using wrong screws might damage the unit.
* Only for illustration purpose.
Do the required wiring. (Page 32)
Dashboard of
your car
Car bracket*
Installing in Toyota cars
Install onto the car brackets using the supplied screws
(C)
or
(D)
.
Use the mounting holes (
) or (
) that fit the car brackets.
KW-X850BT_M_B5A-3844-00_EN_1st Draft.indd 31
KW-X850BT_M_B5A-3844-00_EN_1st Draft.indd 31
14/9/2021 12:00:51 PM
14/9/2021 12:00:51 PM
