11
English |
Continued on the next page...
Before Installation
Before installation of this unit, please note the
following precautions.
#
WARNINGS
• If you connect the ignition wire (red) and the battery
wire (yellow) to the car chassis (ground), you may
cause a short circuit, that in turn may start a fire.
Always connect those wires to the power source
running through the fuse box.
• Do not cut out the fuse from the ignition wire (red)
and the battery wire (yellow). The power supply
must be connected to the wires via the fuse.
#
CAUTION
• Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during and
shortly after the use of the unit. Metal part such as
the heat sink and enclosure become hot.
✎
NOTE
• Mounting and wiring this product requires skills and
experience. For best safety, leave the mounting and
wiring work to professionals.
• Make sure to ground the unit to a negative 12V DC
power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
• If your car’s ignition does not have an ACC position,
connect the ignition wires to a power source that
can be turned on and off with the ignition key. If you
connect the ignition wire to a power source with a
constant voltage supply, such as with battery wires,
the battery may be drained.
• If the console has a lid, make sure to install the unit
so that the front panel will not hit the lid when
closing and opening.
• If the fuse blows, first make sure the wires aren’t
touching to cause a short circuit, then replace the
old fuse with one with the same rating.
• Insulate unconnected wires with vinyl tape or other
similar material. To prevent a short circuit, do not
remove the caps on the ends of the unconnected
wires or the terminals.
• Secure the wires with cable clamps and wrap vinyl
tape around the wires that comes into contact with
metal parts to protect the wires and to prevent short
circuit.
Bluetooth
Playing Bluetooth Audio Device
1
Press the <
> button.
2
Touch [BT Audio].
Ñ
Source control screen
1
3
2
1
Displays the information of the current file.
2
Playing time/File number
Play time bar :
For confirmation of current playing
position.
3
[
] :
Selects Random playback mode.
[
] :
Selects Repeat playback mode.
[
U
], [
H
] :
Plays or pauses.
[
E
],
[
F
] :
Searches the previous/next
content.
Touch and hold to fast forward or fast
backward.
[
1
] :
Searches file.
✎
NOTE
• Operations and display indications may differ
according to their availability on the connected
device.
Ñ
Selecting a content in a list
1
Touch [
1
].
2
Touch desired item.
When you touch a category its contents are
displayed.
3
Touch desired item from the content list.
Playback starts.
• Touch [
6
] to moves to the upper hierarchy.
✎
NOTE
• The source control screen appears when you touch
[
6
] at the top hierarchy.
Installation
!B5K-0672-02_E_QSG_21KWM.indb 11
2021/08/11 12:23
