Page 7
© JVA Technologies www.jva-fence.com
JVA WA20M
Configure IP energiser Controller App
Download the IP Energiser Controller application (IPEC) from the
or
Add a site to your IPEC app:
1.
Press the menu hamburger at the top left
2. Press “Add Site”
3. Name the Site anything appropriate e.g. “North East 6km”
4. Fill in the Unit Serial Number with the serial number of the IP Monitor. This
can be found on the bottom at the back of the IP Monitor.
5. Fill in the Unit Password with the same Serial Number used just before.
The default password set by factory is the serial number of the IP Monitor.
6. 6. Select the “Device Type” as “IP Monitor”
7. Set alarm thresholds for voltage and current accordingly. The IPEC app will
notify you if the IP Monitor hits or
exceeds these thresholds.
8. Press “OK”
