JUWEL S.p.A.
Certified EN ISO 9001:2000 - Via I° Maggio 3/E - 20010 - Vanzago (MI) Italy
Tel +39 02/9347441 Fax +39 02/93570804 P.IVA 00692460421
Prohibited partial reproduction also | © Juwel 2009
HOTEL MODEL - INSTRUCTIONS FOR THE HOTEL
Possibility to open by 2 different codes: Client Code and Master Code for the Hotel. For the client's
safeguard: if the safe is opened by Master Code, this fact will be pointed out at each opening of the
client by the blinking for 30 sec. of OK and ERROR (until the client code has not been changed). The
Hotel is in a position to change the client's combination-code in case he should prevent him from
opening. A NEW HOTEL-CLIENT CAN SET HIS OWN PERSONAL CODE VERY EASILY, without knowing
the pre-existing one (see Instruction for Hotel's Client), provided that he finds the lock open
(if not, the Hotel must open by Master Code).
A) HOW TO OPEN BY MASTER CODE
Press (C), digit the Master Code (initially 000.000.000) and press (E). If after having pressed (C),
ERROR lights up (see Manipulation Warning in General Notes), you can proceed all the same.
B) HOW TO CLOSE : Press (E).
If an obstacle hinders the closing, ERROR blinks and the bolts open themselves again.
Remove the obstacle and press again (E).
C) HOW TO CHANGE THE MASTER CODE
OPEN DOOR, BOLTS WITHDRAWN OUTSIDE THE DOOR (closed lock).
1 -
2 -
Open (as per point A). OK lights up for 6 sec.
Before OK switches itself off, press (C) and HOLD PRESSED until CHANGE lights up.
3 - Digit the New Master Code (from 9 to 12 digits) and press (E).
4 - Once again, for confirmation press: New Master Code, (E). OK lights up.
5 - Before closing the door, check the new code (close and open).
HOTEL MODEL - INSTRUCTIONS FOR THE CLIENT
A) HOW TO MEMORIZE YOUR OWN COMBINATION-CODE
DOOR OPEN, BOLTS WITHDRAWN INTO THE DOOR
1 - Press (C), and HOLD PRESSED until CHANGE lights up.
2 - Digit the desired combination-code (from 3 to 8 digits) and press (E).
3 - Digit the same Combination-Code again and press (E). OK lights up.
B) HOW TO CLOSE : Press (E).
C) HOW TO OPEN
Press (C), digit the Combination-code and press (E). If ERROR is blinking, repeat over again.
After the 3rd error, the system locks itself for 8 minutes: please wait for the acoustic signal, which will
indicate you when the system will function again.
