background image

5

4

6

OPERATING INSTRUCTIONS:

1.   TO OPEN PERSONAL TRANSPORTER 

(IF FOLDED) 

  • Place unit upright on floor
  •  Push down on sides of seat until unit opens  

fully and locks in place (see image 4)

2. TO CLOSE, FOLD PERSONAL TRANSPORTER

 
  •  Lift seat straight up using nylon strap handle on 

center of seat, until unit folds (see image 6)

3.  TO CLOSE, FOLD PERSONAL TRANSPORTER 

FOR STORAGE, TRANSPORT  

 
  •  Repeat operating instructions #2 (above).
  • Reverse step 2–5, assembly instructions

4. BRAKES

  •  Squeeze the brakes to stop the Personal  

Transporter. (See image 7).

  •  Push the brakes straight down to the locking 

position. (See image 8).

  •  BRAKES MUST BE IN THE LOCKED POSITION 

WHENEVER SITTING ON THE PERSONAL 
TRANSPORTER. ALWAYS ENGAGE, DISENGAGE 
BRAKES SIMULTANEOUSLY.

5.  HANDLE BARS

 
  •  To determine handle height—user should stand  

behind Personal Transporter with arms hanging 
at sides and both feet lined up with the rear 
wheels (Image 9). Personal Transporter handles 
should be even with the user’s wrist.

  •  Adjusting handle height—depress push pin on  

the outside of each handle tube. Make sure push 
pin is fully engaged and that handles are the 
same height (image 10).

7

8

3

2

1

5

4

ASSEMBLY INSTRUCTIONS:

1. Lay the unit down on its side (Image 1).

2.  Unscrew the star knobs above the front wheels. 

Flip the wheels down 90 degrees into position. 
Make sure the hole in the wheel aligns with the 
hole in the metal frame.

3.  Lift up on the hinged metal latch and release the 

pin (Image 3) to unfold the rear leg. Drop the leg 
into straight, fixed position. 

Push pin should be  

in the hole.

4.  Re-insert pin into hole through metal frame and leg, 

from inside-out.

Make sure that metal latch on pin crosses over the 
top of the leg and covers the pin on other side, to 
secure it in place. (image 3)

5. Repeat for other leg.

6. Bring personal transporter to standing position.

7.  Open and push down on sides of seat until locked 

in place (image 4).

8.  Place bag over plastic extensions at the front of 

the seat with bag opening facing toward  
the front.

9. Finished look (image 5)

9

10

Reviews: