5
4
6
OPERATING INSTRUCTIONS:
1. TO OPEN ROLLATOR (IF FOLDED)
• Place unit upright on floor
• Push down on sides of seat until unit opens
fully and locks in place (see image 4)
2. TO CLOSE, FOLD ROLLATOR
• Lift seat straight up using nylon strap handle on
center of seat, until unit folds (see image 6)
3. TO CLOSE, FOLD ROLLATOR FOR STORAGE,
TRANSPORT
• Repeat operating instructions #2 (above).
• Reverse step 2–5, assembly instructions
4. BRAKES
• Squeeze the brakes to stop the Rollator. (See
image 7).
• Push the brakes straight down to the locking
position. (See image 8).
• BRAKES MUST BE IN THE LOCKED POSITION
WHENEVER SITTING ON THE ROLLATOR.
ALWAYS ENGAGE, DISENGAGE BRAKES
SIMULTANEOUSLY.
5. HANDLE BARS
• To determine handle height—user should stand
behind Rollator with arms hanging at sides and
both feet lined up with the rear wheels (Image
9). Rollator handles should be even with the
user’s wrist.
• Adjusting handle height—depress push pin on
the outside of each handle tube. Make sure push
pin is fully engaged and that handles are the
same height (image 10).
7
8
3
2
1
5
4
ASSEMBLY INSTRUCTIONS:
1. Lay the unit down on its side (Image 1).
2. Unscrew the star knobs above the front wheels.
Flip the wheels down 90 degrees into position.
Make sure the hole in the wheel aligns with the
hole in the metal frame.
3. Lift up on the hinged metal latch and release the
pin (Image 3) to unfold the rear leg. Drop the leg
into straight, fixed position.
Push pin should be
in the hole.
4. Re-insert pin into hole through metal frame and leg,
from inside-out.
Make sure that metal latch on pin crosses over the
top of the leg and covers the pin on other side, to
secure it in place. (image 3)
5. Repeat for other leg.
6. Bring Rollator to standing position.
7. Open and push down on sides of seat until locked
in place (image 4).
8. Place bag over plastic extensions at the front of
the seat with bag opening facing toward
the front.
9. Finished look (image 5)
9
10